Factory reset using the reset button

There is a factory-reset button located at the back of theDSL-300T. To do a factory reset, hold down the reset button with apaper clip and keep an eye on the status Led on the front of theunit. When the status led goes off release the reset button andafter about 20 seconds the led will come back on and then youshould be able to access the router using the default IPaddress(192.168.1.1).

Factory reset using the web interface

Step 1. Open up a web browser and type in theIP address of the DSL-300T (default is 192.168.1.1). PressEnter.

Step 2. Enter the Login nameand password (default is admin/admin). Click onLogin.

Step 3. Click on the Tools tabat the top. Click on System Commands on theleft.

Step 4. Click on the Restorebutton to factory reset on the unit.