Remote Management allows the device to be configured through theWAN (Wide Area Network) port from the Internet using a webbrowser.

Step 1 Open a web browser and type the IP addressof the DI-634M into the address bar (default is 192.168.0.1). PressEnter.

Step 2 The default username isadmin (all lower case) and the default password isblank (nothing). Click OK.

Step 3 Click on Tools at the topand then click on Admin on the left side.

Step 4In the Remote Managementsubsection, select Enabled.

Step 5 Select the port desired and Admin FirewallRule from the drop down selections.

Step 6 Click on Apply to saveyour settings.

To Remote Manage the router you will need to type in thePublic IP Address of the router in your webbrowser along with the Port Number (separated by a colon) youselected in Step 4.

Example: 68.53.123.2:8080