How do I enable Encryption on the DI-614 wireless router?
It is recommended to enable encryption on your wireless routerbefore your wireless network adapters. Please establish wirelessconnectivity before enabling encryption.
Note: Your network will slow down and wirelesssignal may degrade when enabling encryption due to the addedoverhead.
Step 1 Log into the web configuration of theDI-614 by opening up a web browser and typing in the IP address ofthe router (192.168.0.1).
Step 2 The default username isadmin (all lower case), and the password is blank(nothing). Click OK . Select theHome tab and click the Wirelessbutton on the left hand side of the screen.
Step 3 Select enable next to theWEP radio buttons. For WEP encryption select 64,128, or 256-bit encryption. For the Key typeselect HEX.
Step 4 Select key 1. This will be a randomencryption key you make up. The length of the encryption key willdepend on what you selected under WEP Encryption.
· 64-bit encryption 10 characters
· 128-bit encryption 26 characters
· 256-bit encryption 52 characters
The encryption key is HEX, meaning 0-9 andA-F are valid characters.
Step 5 Click on the Apply buttonthen click on the Continue button to save yoursettings.
1 Други потребители намират това за полезно.
Беше ли това полезно за Вас?1 Други потребители намират това за полезно.
Благодарим Ви за обратната връзка.
Съжаляваме, че не успяхме да помогнем! Натиснете тук за повече Въпроси и отговори или за да отидете в секция Поддръжка.