How to Configure Stacking - DGS-3120-Series
This document is to achieve stacking of several units. Please note that the maximum units that can be stacked are 6 switches of the same family and the switch has two ports for stacking allowing it to use stack in ring topology.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking2.png)
A chain stacking topology allows a maximum bandwidth of up to 20Gbps stacking, where as a closing the ring can reach up to maximum bandwidth of 40Gbps stacking.
Stacking:
Step 1 - Enter the configuration of the Switch through your browser by entering the IP address of the switch, default IP address is 10.90.90.90 so you will need to enter http://10.90.90.90
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking3.png)
The default password is:
User: admin
Password: admin
Step 2 - Once inside the switch configuration go to:
System Configuration > Stacking > Stacking Mode Settings
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking4.png)
Step 3 - Within the "Stacking Mode Settings" activate "Stacking Mode" setting the option to "Enabled" and clicking “Apply”.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking5.png)
• After applying the configuration click the "Save" option in the top menu
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking6.png)
Save Configuration /Log
Type mark in the "ALL" option and click “Apply” to save the changes.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking7.png)
Step 4 - Turn on the Stacking in each of the switches, each are assigned automatically an ID and the role of "Master", if you want to force the state of "Master" to a particular switch, check only on that switch the option "Force master role" and if you also want to specify a different stack ID for each unit, the lower priority will not change the ID only indicate the order in which the role of master performed if the master is removed.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking8.png)
Remember once the settings are saved from the top menu as noted above.
Save Configuration /Log
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking2.png)
A chain stacking topology allows a maximum bandwidth of up to 20Gbps stacking, where as a closing the ring can reach up to maximum bandwidth of 40Gbps stacking.
Stacking:
Step 1 - Enter the configuration of the Switch through your browser by entering the IP address of the switch, default IP address is 10.90.90.90 so you will need to enter http://10.90.90.90
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking3.png)
The default password is:
User: admin
Password: admin
Step 2 - Once inside the switch configuration go to:
System Configuration > Stacking > Stacking Mode Settings
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking4.png)
Step 3 - Within the "Stacking Mode Settings" activate "Stacking Mode" setting the option to "Enabled" and clicking “Apply”.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking5.png)
• After applying the configuration click the "Save" option in the top menu
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking6.png)
Save Configuration /Log
Type mark in the "ALL" option and click “Apply” to save the changes.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking7.png)
Step 4 - Turn on the Stacking in each of the switches, each are assigned automatically an ID and the role of "Master", if you want to force the state of "Master" to a particular switch, check only on that switch the option "Force master role" and if you also want to specify a different stack ID for each unit, the lower priority will not change the ID only indicate the order in which the role of master performed if the master is removed.
![DGS-3420 Series How to Configure Stacking](/br/pt/-/media/faqs/es/dgs/dgs-3420-series-configure-stacking8.png)
Remember once the settings are saved from the top menu as noted above.
Save Configuration /Log
These may also help:
- $name Read Answer