How to hard reset NAS Storage device to default settings?
To hard reset your NAS Storage device, you can reset the NAS by press the RESET button or use the reset function in NAS web interface.
1. Make sure the NAS is well connected to the internet.
2. Use an unfolded paperclip to press and hold the RESET button for at least 20 seconds and wait until the LED turn green.
3. Or you may go to the device web interface by keying in the device IP on the browser
4. Go to System Management->System Settings to restore the NAS to default.
1. Make sure the NAS is well connected to the internet.
2. Use an unfolded paperclip to press and hold the RESET button for at least 20 seconds and wait until the LED turn green.
3. Or you may go to the device web interface by keying in the device IP on the browser
4. Go to System Management->System Settings to restore the NAS to default.
Podobné témata:
- How do I set up my ShareCenter Cloud Storage (NAS) device? Přečtěte si odpověď
- What can I do if the wizard can NOT find NAS? Přečtěte si odpověď
- How do I download mydlink Access-NAS? Přečtěte si odpověď
- I'm getting errors when trying to download files from my ShareCenter. Přečtěte si odpověď
- I'm getting errors when trying to upload files to my ShareCenter. Přečtěte si odpověď
- I’m using Safari 6.1 or higher, and I can’t see any files on my NAS. Přečtěte si odpověď