You will need to open 3 ports in the Virtual Server section ofyour D-Link router.

Step 1 Open your web browser and enter the IPaddress of the router (192.168.0.1).

Step 2 Click on Advanced at the top and thenclick Virtual Server on the left side.

Step 3 Enter the server and port information.The Private IP is the IP address of the computer on your localnetwork that you want to connect to.

Step 4 Click Apply and then click Continue

Step 5 For PC Anywhere, you need more than oneport forwarded to the server. Repeat the Step 2 to 4 until allports are done. UDP 22,5632  TCP5631

Step 6 Click Apply and then clickContinue

Step 7 Run PCAnywhere from the remote siteand use the WAN IP address of the router, not your computer´sIP address.