How do I install the DFE-530TX in SCO Unix 3.2.4x?
1 Login to the network as root. (On maintenancemode)
2 Insert the driver diskette in Drive A or Drive Band use the
doscp command to copy the SCOUNIXDriver into the UNIX directory.
example:
# cd /
# doscp a:/scounix/setup setup
(or # doscp b:/scounix/setup setup)
# chmod x /setup
# ./setup a:/scounix
(or # ./setup b:/scounix)
3 Add a chain by executing the netconfigcommand
example:
#netconfig
A menu similar to the followingappears on the screen:
1) Add a chain
2) Remove a chain
3) Reconfigure an element in a chain
q) Quit
4 Select option 1 "Add a chain".
The following prompt appears:
Select top level of chain to Add or q to quit:
5 Select sco_tcp for SCO TCP/IP for UNIX.
The following messageappears:
Select next level of chain to Add or q to quit:
6 Select p30430. This value variesaccording to your card number.
The following prompt appears:
Add chain sco_tcp->p30430 (y/n):
7 Type "y" for yes.
The following messageappears:
Please select Driver Mode: (1) Auto (2) 100 Full
(3) 100 Half (4) 10 Full (5) 10 Half
Please input your select (1-5):
8 Type in the media mode number. Ex: selct 1for Auto.
The following messageappears:
Input your PCI ID (ENTER is recommended, or 12 hex digits):
9 Specify the internet address (IP address)of the interface.
The following messageappears:
Enter the netmask for this interface:
10 Specify the subnet mask for the interface.Please consult the systems
administrator if it is unknown.Default mask is 255.255.255.0.
The following messageappears:
Does the interface use a broadcast address of all 1's (y/n):
11 Answer this question accordingly. Defaultis "y".
The following messageappears:
Enter the broadcast address for this interface:
12 Type in the broadcast address for theinterface.
The following messageappears:
Are these values correct ? (y/n)
13 If all values are correct, type "y". Otherwise,answer "n" and
repeat the process.
The following messageappears:
XX Pseudo ttys are currently configured, do you want to:
1) Add Pseudo ttys
2) Remove Pseudo ttys
Select an option or enter q to quit [q]
14 Type "q".
The main menu reappears on thescreen:
1) Add a chain
2) Remove a chain
3) Reconfigure a element in a chain
q)Quit Select option:
15 Select "q".
The following messageappears:
Do you want to relink to kernel now ?
16 Type "y" for yes.
The following messageappears:
Do you want this kernel to boot by default (y/n)
17 Type "y" for yes.
The following messageappears:
Do you want the kernel environment rebuilt (y/n)
18 Type "y" for yes.
19 Reboot UNIX by typing the following:
#shutdown -y -g0