How do I configure the Remote Management feature on my DSL-G624M?
Remote Management allows the device to beconfigured remotly from the Internet using a webbrowser.
Step 1. Open up a web browser and type in theIP address of the DSL-G624M (default is 192.168.1.1). PressEnter.
Step 2. Type in the username and password(default is admin/admin). Press OK.
Step 3. Click on Tools at thetop and then click on Admin on the left.
Step 4. Configure the following options underthe Remote Management section:
- Set Remote Management to Enabled
- IP Address - the entry will have an asterisk(*) by default to allow all IP addresses. Type in an IP address toallow only this IP address access to the remote management
- Port - select the port for remote management.Options available are (80, 88, 1080, 8080/ default selection is8080)
Click on Apply to apply the changes.
Step 5. Select Yes to andclick OK to save and reboot the DSL-G624M with thenew settings.