How to connect Network Cameras to NVR?
This FAQ applies to the DNR-312L
If your network supports DHCP
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
1. Connect your Network Cameras to network and power on first.
2. Please insert the CD from the NVR package to your PC, the auto-run will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, it will automatically search and add Network Cameras.
If your network doesn't support DHCP
1. Connect your Network Cameras to network and power on first. Setup your Network Cameras with fixed IP address.
2. Please insert the CD from the NVR package to your PC, the autorun will bring up the Setup Wizard, please follow the instruction of the setup steps to setup NVR first.
3. Connect to NVR web page, manually input the Network Cameras IP address in the setup page.
These may also help:
- Can I use NVR as a NAS? Read Answer
- How can I delete the cameras binding with NVR? Read Answer
- How can I replace a failed disk drive? Read Answer
- How can I view my camera's Live Video for longer than one minute? Read Answer
- How many Cameras can connect to NVR? Read Answer
- What kind of Cameras can connect to NVR? Read Answer
- What kind of Hard Drive can be used with NVR? Read Answer
- How can I check the disk status? Read Answer
- How can I restore the default administrator's password? Read Answer