I'm getting error Unable to add this device to your mydlink account during my mydlink camera setup

Issue

Step 1: Ensure the link between the mydlink camera and the router is good. (The router must be online) and the camera must be powered on with a GREEN LED.

Step 2: Reset the mydlink camera to factory defaults:

Locate the reset pinhole located on the back of the mydlink camera
Press and hold the RESET button for 6-10 seconds while your camera is powered on. The LED will turn RED and the camera will reboot.

Step 3: Close and re-run the setup wizard

64 personnes ont trouvé ceci intéressant

Cette information est-elle utile ? Oui Non

64 personnes ont trouvé ceci intéressant

Merci pour votre avis.

Nous sommes désolé de ne pas avoir répondu à votre attente ! Cliquez ici pour plus de FAQs ou rendez-vous dans la rubrique support.

Active X fails to install during my mydlink camera setup Lire la réponse
Error Unable to connect to mydlink website during Setup Wizard Lire la réponse
How do I add a mydlink-enabled device to my account if it's currently registered to another account? Lire la réponse
How do I connect my camera wirelessly using Wi-Fi Protected Setup(WPS)? Lire la réponse
How do I set up a mydlink-enabled Cloud Camera? Lire la réponse
How to add 2nd camera to the same mydlink account? Lire la réponse

I'm using the Setup Wizard for my camera, but it won't let me save the camera's password. Lire la réponse
I'm getting error Cannot find Camera during my Mydlink camera setup Lire la réponse
What should I do if I can NOT set the device password Lire la réponse
What should I do if I forget my mydlink-enabled products device password Lire la réponse
What should I do if the setup wizard can't find my device? Lire la réponse