1:mkdir temp
        2:cdtemp                
        3:mcopy a:via-rhine.c.      (copies from DOS disk to currentworking directory)
          mcopya:pci-scan.c .        (mcopy ismtools if you don't have mtools,you can mount -t /dev/fd0 and usecp command)
          mcopya:pci-scan.h .
          mcopya:kern_compat.h .
          mcopya:Makefile.                        
         
        4:type
          makeclean
          makeall
          to generatevia-rhine.o && pci-scan.o
    
        5:cp via-rhine.o/lib/modules/2.2.XXX/net/via-rhine.o
          cppci-scan.o /lib/modules/2.2.XXX/net/pci-scan.o
       6:linuxconf                (run linuxconf)
        7:enter setting in theConfig/Networking/Client tasks/Basic host information/
           IP address:    xxx.xxx.xxx.xxx
           Netmask:       255.255.255.xxx
           Net device:    eth0
           Kernel module: via-rhine