How do I open ports for routers?
Scenario 1: Single Port:
By default, your router will block all incoming connections (into your network) and allow all Outgoing connections to the Internet. In some cases, you may need to allow some connections into your network (for Example: Using the Remote Desktop Application). To do this, you must open ports on your router.
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar. Then login and follow the steps below:
Step 1: Click Feature -> Port Forwarding
Step 2: Click Virtual Server and Add Rule
Step 3: Create your rule (FTP server as example), then apply
- Name- Enter a name for the rule (i.e. Web Server 1)
- Local IP: Specify the IP address of the device you are opening the port for
- Protocol: Specify the traffic type (TCP or UDP) - Note: If you are not sure, choose BOTH
- External/Internal Port: Enter the port number you want to open (i.e. 21, for FTP)
Step 4: Click Save After finish adding your rule.
Scenario 2: Multiple Ports:
Please launch your browser and enter http://dlinkrouter.local or http://192.168.0.1 into the address bar. Then login and follow the steps below:
Step 1: Click Feature -> Port Forwarding
Step 2: Enter the TCP port numbers you want to open:
- Name- Enter a name for the rule (i.e. Web Server 1)
- Local IP: Specify the IP address of the device you are opening the port for
- TCP Port: Enter the TCP port numbers you want to open
- UDP Port- Enter the UDP port numbers you want to open
Note: You can enter the ports in multiple different ways- Range (50-100) Individual (80, 68, 888) Mixed (1020-5000, 689)
Step 3: Click Save After finish adding your rule.
Ceci peut également aider.
- How do I backup/restore the configuration on my router? Lire la réponse
- How do I change the login password? Lire la réponse
- How do I change the router’s IP address? Lire la réponse
- How do I configure the wireless mode (802.11) on my router? Lire la réponse
- How do I configure DHCP reservation? Lire la réponse
- How do I configure Dynamic DNS on my router? Lire la réponse
- How do I configure inbound filter? Lire la réponse
- How do I configure QoS on my router, Lire la réponse
- How do I configure the time on my router? Lire la réponse
- How do I connect two routers together? Lire la réponse
- How do I create schedule on my router? Lire la réponse
- How do I disable DNS relay? Lire la réponse
- How do I enable DMZ on my router? Lire la réponse
- How do I enable Guest Zone/Guest Access on my router? Lire la réponse
- How do I enable remote management for my router? Lire la réponse
- How do I login to my router? Lire la réponse
- How do I set up and secure my wireless connection ? Lire la réponse
- How do I set up website filter on my router? Lire la réponse
- How many simultaneous users can my Wi-Fi network handle ? Lire la réponse
- How can I check the firmware version of my router ? Lire la réponse
- How to check system log for router? Lire la réponse
- How to clone my PC MAC address to the router? Lire la réponse
- How to reset my router to factory default setting? Lire la réponse
- How to setup VPN connection? Lire la réponse
- How to upgrade the firmware for my router? Lire la réponse
- My router is dropping connections, how to fix this? Lire la réponse
- What can I do if I’m having wireless connection problems? Lire la réponse
- What model support bridge mode? Lire la réponse
- Why am I unable to register my device with dlinkddns? Lire la réponse
- Why won’t my VoIP device work with my router? Lire la réponse